The separation of a heterogeneous catalyst, an adsorbent, or an ion-exchange resin from a liquid product is a time-consuming unit operation that often makes the use of these materials impractical. The rotating bed reactor is a more efficient technology for deploying catalysts for manufacturing or adsorbents for purification.
Fixed bed reactors (FBRs), also known as packed bed reactors (PBRs), are frequently used for purification, ion-exchange processes, or heterogeneous catalysis. Though relatively easy to construct, they are tedious to charge with solids in an effective way. A poorly packed FBR is subject to channelling, where passages are formed in the bed. These passages offer less resistance to the liquid, which will preferentially travel through those regions. In this work, the robustness with respect to channelling of a packed bed reactor was compared to a rotating bed reactor (RBR) using computational fluid dynamics (CFD).
As a tool for heterogeneous catalysis, or purification of liquids using materials like activated carbon, the rotating bed reactor provides high throughput capability frequently exceeding traditional technologies.
Large volumes of liquid waste will often accumulate at industrial sites. It may be very time-consuming and resource-intensive to adequately treat these waste streams for release, so the problem often compounds over time.
Video showing how a SpinChem® rotating bed reactor (RBR) was charged with solid particles, followed by draining and replacing the reaction liquid without escape of solids. Lastly, the solid phase was removed without opening the RBR. This procedure illustrates a concept for automatic handling of solid phases in production scale equipment without opening the reaction vessel.
The SpinChem rotating bed reactor (RBR) can eliminate poor mass transfer in heterogeneous reactions during chemical syntheses and biotransformations, preserve catalyst activity, and facilitate recycling of solid phases. This brochure presents our technology and its applications.
In pharmaceutical manufacturing and other industries, traditional methods are burdened by unsustainable use of solvents and transition metal catalysts. The use of enzymes is pursued as an alternative, offering greener synthetic routes and better results due to improved specificity. However, enzymes are costly and reusing them for many cycles is practically a requirement for process economy. This essentially means that the enzymes must be immobilized on a solid support so that they can be separated from the product.
Stirred vessels tend to damage soft heterogeneous catalysts, like enzymes immobilized in agarose or alginate beads, with activity loss and tedious workup as consequence. In a fixed bed reactor, these materials are easily compressed by the pressure gradient, leading to a loss of flow rate. Overcoming these challenges opens up the possibility to use biocatalysis as a tool for greener processes and more sustainable manufacturing.
When using of solid-phase catalysts or adsorbents in reactors, the physical degradation of the materials is a common problem. The traditional stirred tank reactor inflicts mechanical damage to the particles, which causes attrition, fines that are difficult to separate, and loss of the functionality of the solid-phase.
Research and development quickly takes new directions, and the requirements on a laboratory may vary with every new project. Limiting yourself to equipment with a narrow scope of conditions and applications may become expensive, since new equipment must be acquired for anything out of scope. With budgets quickly consumed by other projects, the need for new equipment may mean significant delays and a reduced capability to take on emerging opportunities.
The performance of a reactor for heterogeneous chemistry depends on the liquid flow it creates, and the mass-transfer rates it can achieve. Simulations help us investigate in high detail how a rotating bed reactor performs in any configuration.
The synthesis of products, such as active pharmaceutical ingredients (APIs), often involves multiple steps using heterogeneous catalysts or adsorbents. Thus, the simultaneous use of multiple solid phases either during synthesis or downstream processing is frequently highly advantageous.
SpinChem Assembly Guide Video
SpinChem Instruction Video
SpinChem Assembly Guide Video
SpinChem Assembly Guide Video
SpinChem Assembly Guide Video
SpinChem Instruction Video
SpinChem Assembly Guide Video
Can you use a rotating bed reactor (RBR) in any type of vessel? - Absolutely! Would the performance be higher with baffles in the vessel? - Definitely!
Research and development quickly takes new directions, and the requirements on a laboratory may vary with every new project. Limiting yourself to equipment with a narrow scope of conditions and applications may become expensive in the long run. The need for new equipment may inflict delays and affect your capability to take on emerging opportunities.
Sometimes you don’t want to pack the entire rotating bed reactor full with your solid-phase material. Fully loading might simply be wasteful, or you may want to experiment with your reaction conditions. But how does the amount of solids in the rotating bed reactor influence the reaction performance? Can you use only 10% of the full capacity?